Monel Alloy 400 Tubing
|Terms of Trade:||FOB,CFR,CIF,EXW|
|Min. Order:||1 Ton|
|Delivery Time:||35 Days|
|Productivity:||500 ton /month|
|Place of Origin:||China|
|Supply Ability:||500 ton/month|
Model No.: NA01
Monel Alloy 400
Monel Alloy 400 (NA13, N04400) is a nickel-copper alloy resistant to seawater and steam at high temperatures and widely used in the chemical, oil and marine industries. As a solution strengthened material, Monel Alloy 400 displays good strength, toughness and corrosion resistance at temperatures up to 400°C.
Monel Alloy 400 (NA13, 2.4360) is supplied by Columbia Metals in the cold worked condition as standard.
Monel Alloy 400 (NA13, 2.4360) is used for offshore and marine applications and for chemical processing.
Its corrosion resistance is particular strong in rapid flowing brackish water or seawater. Monel Alloy 400 exhibits good resistance to hydrofluoric and dilute non-oxidising acids, alkalis and salts. It resists corrosion by dry chlorine and hydrogen chloride and is not susceptible to stress corrosion cracking. Monel Alloy 400 (NA13) is readily cold formable and weldable.
Related Specifications of Monel Alloy 400
- ASTM B164
- ASME SB164
- NACE MR 0175
- ISO 15156-3
- NU 30 (FR)
Nominal Composition of Monel Alloy 400
Ni 66.5%, Cu 31.5%
Mechanical Properties of Monel Alloy 400
|Ultimate Tensile Strength (N/mm²)||Proof Stress (N/mm²)||Elongation (%)||Hardness (HB)|
|480-600||170-415||20-35||35 HRC max|
Alloy 400 is a solid-solution binary. As nickel and copper are mutually soluble in all proportions. It is a single-phase
alloy. It has a face-centered cubic lattice structure with a lattice parameter of 3. A
Alloy 400, with an excellent combination property, is a corrosion resistent alloy in a wide range of use and applications.
It has an excellent corrosion resistance in the media of hydrofluoric acid and fluorine and also a good corrosion resistance to hot strong alkali liquor. Besides it also resistant to corrosion in the neutral solution, water, sea water, air,organic compound etc. One important character of the alloy is that the s tress corrosion cracking normally doesn’t occur and it has a good machinability
Alloy 400 exhibits resistance to corrosion by many reducing media. It is also generally to attack by oxidizing media than
higher copper alloys. This versatility makes alloy 400 suitable for service in a variety of environment;
Alloy 400 is widely used in marine applications. While alloy 400 products exhibit very low corrosion rates in flowing seawater
Stagnant conditions have been shown to induce crevice and pitting corrosion. Alloy 400 is also resistant to stress corrosion cracking and pitting in most fresh and industrial water
Alloy 400 offers exceptional resistance to hydrofluoric acid in all concentrations up to the boiling point;
It is perhaps the most resistant of all commonly used engineering alloys Alloy 400 is also resistant to many forms of sulfuric and hydrochlorid acids under reducing
Monel 400 is a material in a variety of applications, and is applied in many industrial areas. tubing
- Feed-water and steam Generator in power plants
- Brine heaters and evaporator bodies in seawater desalination plants
- Pumps and values used in the manufacture of chlorinated hydrocarbons
- Cladding for crude oil distillation columns
- Splash-zone sheathing in offshore structures
- Plants for uranium refining and isotope separation in the production of nuclear fuel
- Propeller and pump shafts for seawater service.
Unidus Cooperation (HK) Limited
One Vendor, One Solution
Unidus Cooperation (HK) Limited has grown into one of the excellent metal and non-ferrous product supplier in China. We provide one-stop service conform to your exact product specifications globally. Our central location in Hongkong and five factories in China mainland, allows us to efficiently monitor our manufacturing schedule to meet our customers` timeline and budget needs.
Unidus Tube`s inventory includes carbon steel, alloy steel, stainless steel and nickel alloy, titanium alloy, as well as copper alloy. Our OD range is 1/8″ through 60″ with wall thickness up to 3." We mostly specialize in seamless/welded cold dawn tubes for hydraulic cylinder (honed tube), mechanical application and heat exchanger&boiler field which including finned tube as well as U bent tube. In addition, we supply oilfield tubular goods, in both seamless and welded.
Our materials also include various types of the floating tube sheet, baffle plate, metal sheet, wire, bar etc.
On Time, On Budget, For Over 10 Years
Our reputation is for providing competitive prices, technical services and on-time deliveries for every project for over 10 years. We have experienced employees to respond quickly to all your requests. If a specific product is not in stock when you request it, we guarantee the shortest lead time available because we have subordinate factories to produce what exact products base on your urgent demand.
All of our products can meet or exceed ASTM/ASME, DIN,EN and JIS standards per your specific requirements and include full documentation.
- Company Name: Unidus Cooperation (HK) Limited
- Representative: Steve
- Product/Service: Titanium Tube , Finned Tube , Heat Exchanger , Stainless Steel Tube , Honed Tube , DOM Tube
- Capital (Million US $): 20000000RMB
- Year Established: 2008
- Total Annual Sales Volume (Million US $): US$10 Million - US$50 Million
- Export Percentage: 51% - 60%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 30
- No. of R&D Staff: 11 -20 People
- No. of QC Staff: 11 -20 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): Above 100,000 square meters
- Contact Person: Mr. Gary
- Tel: +86-512-58577588
Premium Related Products